Best wen metal lathe – Our Recommendations

This is the ultimate buyer’s guide to the Best wen metal lathe . We would recommend using BestEquip Metal Lathe 7″ x 14″,Mini Metal Lathe 0-2500 RPM Variable Speed,Mini Lathe with 4″ 3-jaw Chuck,Bench Top Metal Lathe, Benchtop Lathe, for Various Types of Metal Turning as it is a high-quality product

Top 9 wen metal lathe – Our Picks

Top wen metal lathe review

WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe

 in stock
15 new from $149.28
Free shipping
Amazon.com
as of February 25, 2022 4:22 pm

Features

  • Perfect for pens, bowls, cups, chess pieces, and other small workpieces
  • Fits workpieces up to 12 inches long and 8 inches wide
  • 3.2-Amp motor provides over 50% more power than most 8-inch wood lathes
  • Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM
  • Features a 2.3-Inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests

WEN LA8800 225-Pound Capacity Height Adjustable Steel Lathe Stand

 in stock
2 new from $106.58
Free shipping
Amazon.com
as of February 25, 2022 4:22 pm

Features

  • Designed to fit the entire WEN Benchtop Wood Lathe series
  • Sturdy steel design holds lathes up to 225 pounds
  • Adjustable height goes from 24.5 inches to 34.5 inches with stops every 1.5 inches
  • Adjustable length goes anywhere from 23.25 to 37.25 inches for compatibility with the majority of benchtop wood lathes

WEN MLA007 Premium 5/16-Inch Nickel-Plated Indexable Carbide-Tipped Metal Lathe Tool Bits, 7-Piece Set with Storage Case

 in stock
3 new from $64.49
Free shipping
Amazon.com
as of February 25, 2022 4:22 pm

Features

  • Universal 8 by 8 mm shanks (5/16 inch) allow for compatibility with your WEN metal Lathe
  • Aluminum case protects the seven included bits during storage and transportation
  • Perfect for aluminum, brass, bronze, cast iron, steel, stainless steel, plastic, titanium and more
  • Swap out or rotate the indexable Carbide tips to maintain a sharp and precise cut
  • Includes two 95-degree bits (SCLCR 5/16″-2 and SCLCL 5/16″-2), one 93-degree bit (SDJCR 5/16″-2), one 90-degree bit (SWGCR 5/16″-5), one 62. 5-degree bit (SDNCN 5/16″-2), one flat threading bit (SER 5/16″-8), and one grooving bit (MGEHR 5/16″-2)

HGC MT2 Rotary Live Center Shaft Morse Taper Heavy Duty Bearing Lathe Metal Turning

 in stock
2 new from $26.99
Free shipping
Amazon.com
as of February 25, 2022 4:22 pm

Features

  • Uses: Suitable for high-speed turning of metal or wood, CNC machining and general purpose of manual engine lathes.
  • Package include:1 x MT2 Live Center
  • High quality replacement parts.
  • The measurement of the actual items may slightly different from the listing images due to manual measurement,please allow 0.5-1mm difference.Thanks for your understanding.
  • Shipped from US with an estimated receiving time of 2-5 business days.

WEN 33182A 8-Piece Imperial Steel Collet Set for R8 Metal Milling Machines

 in stock
4 new from $69.52
Free shipping
Amazon.com
as of February 25, 2022 4:22 pm

Features

  • Hold your end mills securely in place during high-torque metal-milling operations
  • Includes 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 9/16, and 5/8-inch collets
  • Made from precision ground and hardened steel
  • Compatible with the WEN 33013 Metal Milling Machine and the WEN 33108A 8-Piece 2-Flute HSS End Mill Set
  • Universal design fits any R8 milling machine available on the market

WEN 33013 4.5A Variable Speed Single Phase Compact Benchtop Milling Machine with R8 Taper

 in stock
2 new from $1,778.86
Amazon.com
as of February 25, 2022 4:22 pm

Features

  • Variable speed goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting
  • 18-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis
  • Bevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more
  • Compact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print
  • Includes an R8 spindle taper, a pre-installed drill chuck (1/32 to 1/2 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 13-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty

BestEquip Metal Lathe 7" x 14",Mini Metal Lathe 0-2500 RPM Variable Speed,Mini Lathe with 4" 3-jaw Chuck,Bench Top Metal Lathe, Benchtop Lathe, for Various Types of Metal Turning

 in stock
2 new from $499.99
Amazon.com
as of February 25, 2022 4:22 pm

Features

  • 【STURDY METAL CONSTRUCTION】- The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection.
  • 【INFINITELY VARIABLE SPEEDS】- Variable speed from 0-2500 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included.
  • 【PROFESSIONAL COMPOUND REST】- The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod.
  • 【WIDE APPLICATION】- Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works.

WEN JT833H 10-Amp 8-Inch Spiral Benchtop Jointer with Extendable Table

 in stock
3 new from $398.39
Free shipping
Amazon.com
as of February 25, 2022 4:22 pm

Features

  • Spiral cutterhead system utilizes 16 staggered HSS blades for an ultra fine finish
  • Features a spacious 33-by-8-inch table with support arms that extend up to 51 inches
  • Remove 0 to 1/8 of an inch of material with each pass
  • Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees

Grizzly Industrial G0602-10" x 22" Benchtop Metal Lathe

 in stock
2 new from $2,720.00
Amazon.com
as of February 25, 2022 4:22 pm

Features

  • Swing over bed: 9-1/2"
  • Swing over cross slide: 6-1/8"
  • Distance between centers: 22"
  • Spindle bore: 25mm
  • Spindle thread: 1-3/4" x 8 TPI

The popular wen metal lathe brands

One of the things we suggest to most of our readers is to buy the wen metal lathe from a well-known brand. Good brands provide, good quality products, great customer support, and have service centers in different places around the country. Regarding the wen metal lathe I have a preference for the products of the brands listed below.

  • BestEquip
  • BestEquip
  • Grizzly
  • WEN
  • WEN
  • Mophorn
  • SENDUO
  • wen metal lathe – Buyer’s Guide

    There are some things you should consider when buying a wen metal lathe. We spent 22 hours researching the most important things you should consider when buying a wen metal lathe. So should we start with the list of things you should consider?

    1. Budget and price matching

    Make a list of the things you want in your wen metal lathe and the price you are willing to pay for it. So try to look for a product in that price range and choose the one that appeals to you the most. One tip we would like to give you is: don’t settle for a cheaper product if it doesn’t even have a function you need.

    Most wen metal lathes fall within the price range of $ 585.99 to $ 721.99. Therefore, if budget is not a problem and you want the best product for your needs, we advise you to choose the BestEquip Metal Lathe 7″ x 14″,Mini Metal Lathe 0-2500 RPM Variable Speed,Mini Lathe with 4″ 3-jaw Chuck,Bench Top Metal Lathe, Benchtop Lathe, for Various Types of Metal Turning.

    If you want something medium range, choose WEN LA8800 225-Pound Capacity Height Adjustable Steel Lathe Stand. If you have a very low budget, you can choose the one that is the Upgrated Metal Lathe 7″ x 14″, Mini Metal Lathe 550W,with Digital Display, Metal Lathe Variable Speed 50-2500 RPM Metal Gear for Precision Parts Processing

    2. Does it have all the features you need?

    Most importantly, the wen metal lathe you are purchasing should have all the features you are looking for. In case you don’t even have one, don’t buy! We are saying this because you will not be able to use it for that purpose. If you are a person without budget problems, I would suggest you to choose the best model which is Upgrated Metal Lathe 7″ x 14″, Mini Metal Lathe 550W,with Digital Display, Metal Lathe Variable Speed 50-2500 RPM Metal Gear for Precision Parts Processing

    3. The brand

    Buying the wen metal lathe from a reputable brand can actually make sense. Not only will it be better than others in terms of “build quality”, but it will also have some extra features, better customer support. Famous brands have multiple service centers across the country, so if you have any problems you can simply take your wen metal lathe to one of their service centers.

    4. Warranty Matters!

    When you buy a wen metal lathe from a well-known brand, you will get a guarantee. Low-cost products also come with warranties, but the claim process could be tougher. That’s why I always suggest you buy the product from a reputed brand and the one that comes under warranty. It will save you from repair costs in the future. On average, around 21% of people end up paying 40% of the product price for the service! You can save on service costs if the product is under warranty!

    5. Check out our website

    On our website we have experts in all categories and no matter what the product is, we have a better review or list about it. The products on our list are based on expert picks, advice and hours of research. That’s why when you buy something that’s listed on our best list, you won’t regret it. However, there is a possibility that we may not have covered the product you might be interested in, but if you come across something like this, please let us know via comments or contact us.

    FAQs

    What is the best wen metal lathe?

    The best wen metal lathe is the one that has all the features that meet your needs. I think the best is BestEquip Metal Lathe 7″ x 14″,Mini Metal Lathe 0-2500 RPM Variable Speed,Mini Lathe with 4″ 3-jaw Chuck,Bench Top Metal Lathe, Benchtop Lathe, for Various Types of Metal Turning

    Are there any good deals on wen metal lathe?

    In the offline market, you won’t find many offers. However, I have chosen the best wen metal lathe and have added links to Amazon which has deals and deals running on a regular basis.

    What is the cheapest wen metal lathe?

    Although most of the cheaper wen metal lathe do not have many features, but if you are looking for the best one at a low cost, my best bet would be on Upgrated Metal Lathe 7″ x 14″, Mini Metal Lathe 550W,with Digital Display, Metal Lathe Variable Speed 50-2500 RPM Metal Gear for Precision Parts Processing

    Where can I buy the wen metal lathe?

    There are several places where you can buy it, but in my opinion, when it comes to the online marketplace, I wouldn’t recommend anything other than Amazon. It’s because their service is great!

    Why should you trust our website?

    We have been in the review business for more than 15 years and our motive is to help people buy the top rated products at the best price. We went through 22 to help you find the best wen metal lathe

    Conclusion

    We hope you liked the wen metal lathes that we have listed in our best list. If it was helpful, bookmark our site and share it with people you know whenever they intend to buy something.
    To conclude this guide,

  • If you are looking for the best wen metal lathe: you should consider the idea of BestEquip Metal Lathe 7″ x 14″,Mini Metal Lathe 0-2500 RPM Variable Speed,Mini Lathe with 4″ 3-jaw Chuck,Bench Top Metal Lathe, Benchtop Lathe, for Various Types of Metal Turning
  • If you want the one that has similar characteristics to the best, then you should consider BestEquip Metal Lathe 8×16 Inch,Mini Metal Lathe Infinitely Variable Speed 2250RPM,Precision Lathe Machine 750W,Metal Working Lathe, Small Metal Lathe,for Precision Parts Processing
  • If you want a wen metal lathe that is “value for money”, choose Grizzly Industrial G0602-10″ x 22″ Benchtop Metal Lathe
  • If you want the cheapest wen metal lathe, then Upgrated Metal Lathe 7″ x 14″, Mini Metal Lathe 550W,with Digital Display, Metal Lathe Variable Speed 50-2500 RPM Metal Gear for Precision Parts Processing should be the best for your needs!
  • Updated: October 23, 2021 — 3:43 am